Date: Sun, 8 Oct 2000 10:00:47 -0700 From: Marjorie ShapiroSubject: Using the Run 2 generators to create files for Run 1 I have just added to the Run 2 generatorMods area a module called FillRun1BanksModule. This module will read the Run 2 LRIH bank and create an LRID bank with the same information. People who want to use the lastest versions of the generators to finish Run 1 analysis can now do so following the procedure below: 1. In the Run 2 environment, add the module generatorMods/FillRun1BanksModule to your AppUserBuild cc file 2. In your tcl file, make sure them module runs after the generator. Also, to make sure the necessary banks are on the output file, the commands to create an output file should look like this talk FileOutput output create myoutput test.root output enable myoutput output path myoutput AllPath output keepList myoutput LRID_StorableBank EVCL_StorableBank \ HEPG_StorableBank output list show exit (of course you can name the file whatever you want and not just test.root) 3. After running your job, you need to convert the file from root to ybos format. There is a prebuilt binary to do this in the bin area. To run it, on an sgi you do: $CDFSOFT2_DIR/bin/IRIX6-KCC_3_3/Edm_SeqRoot2Ybos -o test.ybs test.root (the same thing on Linux, except the command is $CDFSOFT2_DIR/bin/Linux2-KCC_3_3//Edm_SeqRoot2Ybos -o test.ybs test.root ) This will produce a file you can read with the Run 1 Analysis_Control.